Pellet Stove Furnace
Pellet stoves can be used as a secondary heat source or, with proper venting, as a primary heating option. These stoves are available in freestanding models as well as fireplace inserts. They can give the appearance of an old-fashioned wood-burning fire.
The auger carries pellets from the hopper to the combustion chamber where they are burned to create heat. Sensors monitor the fire and can adjust its rate of operation to maintain your desired temperature in the room.
1. Energy Efficiency
Pellet stoves use a non-toxic, renewable fuel made from compressed sawdust and other substances. They are typically disposed of in landfills, but can be used to create a clean, efficient source of heat. They can help homeowners cut down on their energy use and therefore greenhouse gas emissions. Many users of pellet stoves say that they recoup their initial investment in just a couple of years, by reducing their heating bills.
Pellets are extremely compressed and are more dense than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional wood-burning fires. They are also packaged in plastic bags that are sealed to keep out moisture and require less frequent cleaning.
Like other heating systems, pellet stoves need to be properly size and vented. A trained technician will be able to evaluate your venting requirements and space requirements in order to get the best results.
During installation, the hearth is built to size and the vent is installed through a pre-cut hole your home's siding. The vent may be installed through a roof or sidewall depending on your preference and local laws.
After the hearth and vent are completed then the pellet stove can be connected and switched on. Certain manufacturers provide a remote control that makes starting and maintaining the fire simple, while others have additional sensors that monitor airflow, combustion, flue temperature, and pressure. When the system detects it requires more pellets or less, it will signal to the auger that it needs to accelerate or slow it down according to the need.
All stoves have a storage tank that can hold between 35 and 130 pounds of pellets. Hopper capacities affect how often the stove has to be filled with more hoppers, allowing for longer intervals between refills. A grille draws air from the room, then passes it over the heat exchanger, and then blows heated air in the living space through convection. A grate or an auger distributes the pellets, and an under-sink pan collects any unburnt ones along with combustion residue.
Pellet stoves are less energy-intensive than wood-burning stoves, but they are not as efficient as natural gas or electric furnaces. Electric components that drive motorized components of the stoves require a power source. This could cause a problem in a power failure, although backup systems such as generators and batteries are available.
2. Low Maintenance
Pellet stoves are extremely efficient, however they require some maintenance in order to run correctly. Cleaning go to these guys and its exhaust vent on a regular basis will stop the accumulation of harmful creosote, which could cause a fire or explosion that could damage your stove or even your home.
A pellet stove is a device that burns compressed natural wood particles or other materials (like corn kernels, nutshells or small pieces of scrap wood). The pellets are introduced into the combustion chamber via an auger powered with electricity. pellet stoves inserts at which pellets are fed to the burner is controlled by the thermostat you set. The fire can be kept roaring, or it can be modulated lower and even extinguished depending on the temperature you set. The ash will be collected in an empty ash tray underneath the burner. It can be easily removed and then disposed.
Pellets are made from the byproducts of wood processing which would otherwise be thrown away. They are a renewable resource and produce less dust than traditional wood-burning appliances making them a cleaner burning heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals that are released from pellet stoves is significantly lower than the more modern EPA certified wood stoves.
These stoves aren't required to be vented through a chimney, as is the case with traditional wood stoves. Instead, they can be vented correctly via a wall, or other structure outside. Pellet stoves have flue ports that are open at the top or rear of the appliance and are connected to a vent pipe that extends outside the home.
A pellet stove has one drawback that you must purchase or store enough fuel pellets to last for the whole winter season. Pellet stove owners typically use three tons of wood pellets every winter, at a cost of $200 per ton. The cost can be high, but they are cheaper than purchasing firewood and then hauling it away for a fireplace or wood-burning stove. You should purchase enough pellets to ensure your stove will be able to run through the coldest winter months. Also, you need to have a place to store the pellets (preferably dry and cool).
3. Reduced Carbon Footprint
Pellet stoves make use of renewable biomass fuel to create heat, thus reducing the dependence on fossil fuels that are depleted. This reduces carbon footprints and diversifies the sources of energy for homes.
Even the latest wood stoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions of pellet stoves are also lower than those from gas furnaces. Pellets are made of compressed sawdust, bark, and other lumber waste. They can also comprise various other substances like soybeans, corn as well as nutshells, cherries pits, and agricultural waste. When burned, they emit less particulates (leading to respiratory problems and allergies) carcinogens and carbon monoxide as well as nitrous oxides.
The major difference between the wood stove and the pellet stove is the feed system. Pellet stoves have hoppers which contain the pellets. When the thermostat or sensors signal that the room is in need of heating, the furnace turns and the pellets are pumped into the combustion chamber where they burn and produce heat. The combustion chamber's air is then pumped through a heat exchanger which transmits heat to the blower. This process produces very little emissions, and creosote is not produced.
After the hopper has been empty, the ash is removed by a cyclone, and it is then deposited into an ash container. The stove also features an air circulator to move the fresh, heated air into the living room. Most pellet stoves require only minimal maintenance and feature a large viewing area for you and your loved ones to relax and enjoy the flames.
The quality of pellets is the primary factor that affects pellet stove emissions. Pellets that are not of the highest quality will cause more emissions. When selecting your pellets, ensure that they are certified to meet certain standards and do not contain other ingredients like petroleum or urea. Also make sure you choose a manufacturer who offers a warranty and will repair or replace parts in the event of a malfunction. Certain states provide homeowners with a tax credit if they want to go even greener. This is a great opportunity to help to offset the initial cost of this type of stove and make it easier to set up.
4. Reduced Noise
Pellet stoves produce very little smoke or exhaust when compared to wood-burning fireplaces. A fan is employed to spread heat more evenly throughout the room. This is among the reasons that pellet stoves require less maintenance than traditional wood stoves. While wood stoves must be cleaned regularly of dust and chemicals, pellet stoves only need an specialized metal vacuum cleaner for regular cleaning.
Many manufacturers have made a conscious effort to design their stoves to be easy to set up and operate as well as maintain. They are available in a variety of styles that complement the interior decor of your home. Some models come with programmable thermostats remote control, as well as WIFI app so you can manage and monitor your stove from anywhere in the world.
The majority of pellet stoves come with a large fuel hopper which can hold between 35 and 130 pounds of pellets. The pellets are then delivered into the combustion chamber via an auger. The speed at which the pellets are fed to the burner determines how hot the fire is and the heat output. The hopper could be filled with hardwood pellets, made from wood with a dense structure such as oak and hickory, or softwood pellets. A lot of stoves can use biomass pellets made of corn and switchgrass. This is a green option.
Since pellet stoves burn as a clean fuel, they generate less smoke than conventional wood-burning fireplaces and require fewer maintenance. They also do not require a chimney, making them a much more suitable choice for new constructions or retrofits.
Pellet stoves do not require regular cleaning of creosote and other chemicals like wood stoves. They only need periodic inspections to ensure proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. Your appliance dealer will be able to explain the correct procedures for your particular brand and model. They can also provide details regarding storage and safety, and assist you in locating the correct fuel for your stove.